The pipe fittings generally incorporate an integral part of any pipe system. Therefore alloy 20 fittings offer several suggestions of alloy grade parts that may be collectively said as pipe fittings systems. Different pipe fittings find suitable industries, and the alloy used in any industry also depends upon the types of the sector.
Alloy 20 pipe fittings are employed in high corrosive and acidic media and provide high resistance against sulfuric acid and acetic acids. Alloy 20 can be formed easily either by hot workings or cold workings using old methodologies. Alloy 20 pipe forged fittings carefully heated under 2100-2250℉ by ensuring pipe fittings’ temperature does not fall below 1800℉ before forging.
Otherwise, it may lack alloy 20 properties. Alloy 20 pipe fittings are cost-saving steel grades with better-required resistance compared to other higher-cost alloys in different corrosive areas. Alloy 20 fittings are available in various standards such as ASME B16.9, ASME B16.11, ASME B16.28, etc. The available sizes for seamless and welded fittings are 10-48 and the thickness from 2-40mm. The chemical combination of alloy 20 is nickel up to 38%, carbon 0.02%, manganese 2%, copper 4%, molybdenum 3%, and other small range elements.
Alloy 20 Cross, Alloy 20 Pipe Cap Stockist, ASME SB 366 Alloy 20Cb-3® Pipe Bend, Incoloy® alloy 20 Stub End, Carpenter 20 Butt weld Fittings, Alloy 20 LR Elbow Exporter in India.
Alloy 20 Pipe Fittings at Best Price, Alloy 20Cb-3® Industrial Pipe Fittings Distributors, Alloy 20 Welded Pipe Fittings, Alloy 20 Seamless Butt weld Fittings, Incoloy® alloy 20 SR Elbow Manufacturer in India.
STANDARD | WERKSTOFF NR. | UNS | EN | AFNOR |
Alloy 20 | 2.4660 | N08020 | NiCr20CuMo | Z2NCUD31-20AZ |
Specification : | ASTM B366 / ASME SB366 |
Dimension Standard : | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
Size : | Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″ |
Thickness : | Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS |
Bending Radius : | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
Type : | Seamless / Welded / Fabricated |
Grade | C | Mn | Si | S | Cu | Ni | Cr | Fe | Mo | P |
Alloy 20 | 0.07 max | 2.00 max | 1.00 max | 0.035 max | 3.00 – 4.00 | 32.00 – 38.00 | 19.00 – 21.00 | 29.85 min* | 2.00 – 3.00 | 0.045 max |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Alloy 20 | 8.1 g/cm3 | 1443 °C (2430 °F) | Psi -80,000, MPa -551 | Psi – 35,000, MPa – 241 | 30 % |
The full identification of the pipe fittings should be continuously marked down its whole length, including :
Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | Kanpur |
Thane | Bhopal | Sri City | Bareilly | Hosdurg | Pithampur |
Saudi Arabia | Oman | Kuwait |
Bahrain | Qatar | UAE |
Nigeria | Mexico | Canada |
India | Tanzania | Belgium |
United States | South Africa | Malaysia |
Singapore | Sri-Lanka | Australia |
France | Italy | South Korea |
Netherlands | Africa | Germany |
Poland | Turkey | Brazil |
Iran | China | United Kingdom |
Copyright © 2023 | Anand Steel | All Rights Reserved | Design By Finplus