Nickel 200 and 201 grades show various properties in many corrosive atmospheres and acidic and alkaline environments. Nickel 200/201 allows hot forming at the temperature range from 870-1230ºC. In any operation, raising the temperature above 1230ºC might result in dissimilar properties. Any conventional cold methods can utilize nickel 200/201 Rounds Bars, and the results are about equivalent to mild steels. The power requirement in operation is high due to the high tensile limit on both grades. Nickel 200 and 201 are generally machined in the annealed condition in most possibilities. To assure optimal heat conductivity, liquid cold forming lubricants are required during machining. Both 200 and 201 have unique features that fall in the top class superior quality alloys list with enriched corrosion resistance properties that even enhanced the supply of Nickel 200/201 Round Bars across the world.
Nickel 200/201 Round Bars are used in aircraft and missile components, chemical processing, food processing equipment, marine and maritime industries, and petrochemical processing, among other uses.
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
– ASTM B160 200/ 201 Nickel Round Bar
– UNS N02200/ 201 Round Bar
– Nickel 2.4066 Round Bars
– NW 2200/ 201 Round Bars
– Nickel 200/ 201 Round Bars
– ASTM B160 200/ 201 Nickel Square Bars
– UNS N02200/ 201 Square Bar
– Nickel 2.4066 Square Bars
– NW 2200/ 201 Square Bar
– Nickel 200/ 201 Square Bar
– ASTM B160 200/ 201 Nickel Hollow Bars
– UNS N02200/ 201 Hollow Bar
– Nickel 2.4066 Hollow Bars
– NW 2200/ 201 Hollow Bar
– Nickel 200/ 201 Hollow Bar
– ASTM B160 200/ 201 Nickel Hex Bars
– UNS N02200/ 201 Hex Bar
– Nickel 2.4066 Hex Bars
– NW 2200/ 201 Hex Bar
– Nickel 200/ 201 Hex Bar
– ASTM B160 200/ 201 Nickel Bright Bar
– UNS N02200/ 201 Bright Bar
– Nickel 2.4066 Bright Bars
– NW 2200/ 201 Bright Bars
– Nickel 200/ 201 Bright Bar
– ASTM B160 200/ 201 Nickel Forged Bars
– UNS N02200/ 201 Forged Bar
– Nickel 2.4066 Forged Bars
– NW 2200/ 201 Forged Bar
– Nickel 200/ 201 Forged Bars
Specification : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Standard Specification : | ASTM B160 / ASME SB160 |
Size : | 15NB to 150NB IN |
Diameter : | 3.17mm to 350mm diameter |
Length : | 100 mm to 3000 mm Long & Above |
Tolerance : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Finish : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Form : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc |
Surface : | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
Condition : | Cold Drawn Polished Cold Drawn Centreless Ground & Polished |
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 200/ 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
The full identification of the bars should be continuously marked down its whole length, including :
Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | Kanpur |
Thane | Bhopal | Sri City | Bareilly | Hosdurg | Pithampur |
Saudi Arabia | Oman | Kuwait |
Bahrain | Qatar | UAE |
Nigeria | Mexico | Canada |
India | Tanzania | Belgium |
United States | South Africa | Malaysia |
Singapore | Sri-Lanka | Australia |
France | Italy | South Korea |
Netherlands | Africa | Germany |
Poland | Turkey | Brazil |
Iran | China | United Kingdom |
Copyright © 2023 | Anand Steel | All Rights Reserved | Design By Finplus